Sharp ER-1875 Instruction Manual page 3

INTRODUCTION
Thank you very much for your purchase of the SHARP Electronic Cash Register, Model
ER-1875.
Please read this Manual carefully before operating your machine in order to gain a full
understanding of its function and performance.
Please keep this Manual for future reference, it will help you, if you encounter any
operational problems.
| IMPORTANT
@ install your ER-1875 in a location that is not subject to direct radiation, unusual
temperature changes, high humidity or exposed to water sources.
Installation in such locations could cause damage to the cabinet and the electrical
components.
@ The register should not be operated by an individual with wet hands.
The water could seep into the interior of the ER-1875 and cause component failure.
@ When cleaning your register, use a dry, soft cloth. Never use volatile liquid, such as
benzine and thinner.
The use of such chemicals will lead to discoloration or deterioration of the cabinet.
@ The ER-1875 register plugs into any standard wall outlet (local voltage +10% AC).
Other electrical devices on the same electrical circuit could cause the ER-1875 to
malfunction.
@ If the register malfunctions call your local dealer for service — Do not try to repair
the register yourself.
PRECAUTION
This Electronic Cash Register has a built-in memory protection circuit which is operated
by rechargeable batteries.
As you know, all batteries will, in time, dissipate their charge even if not used.
Therefore to insure an adequate initial charge in the protection circuit, and to prevent
any possible loss of memory upon installation, it is recommended that the unit be al-
lowed to recharge for a period of 24 to 48 hours prior to use by the customer.
In order to charge the batteries, the machine must be plugged in and left on in the
"REGISTER MODE". This recharging precaution can prevent unnecessary initial service
calls.