Table of Contents
Advertisement
Available languages
Available languages
"OVERFLOW ERROR ALARM
The purpose of the overflow error alarm is to alert the operator that the digit capacity
of the register has been exceeded.
The audible alarm sounds (beep) is accompanied with
the" —" symbol in the register display.
All transaction registration is dis-allowed until
the error is cleared. To clear the error press the
key.
a
(1)
Number entry greater than 7 digits.
®
Clear the entry and enter a valid number.
(2)
Registration is made over the preset
@ Clear the registration and make the registration
limit to the number of digits or to
within the existing limit.
the amount entry.
(3)
Sub-total of one transaction
exceeds 7 digits.
@ Clear the entry and press the
or
key
to finish the transaction.
The machine prints
the
amount
that had
been
calculated
before
the error occured.
(4)
Q'ty + Unit price exceeds 7 digits.
@
Clear the registration and re-enter properly.
@ |fakey is operated by mistake, the error alarm signal sounds briefly.
The machine will refuse any further key input at this time, so operate proper keys
successively.
Advertisement
Table of Contents
