Bluetooth - MAJORITY MP3 GO Player User Manual

The Majority MP3 GO can be paired via Bluetooth with earbuds or external speaker
using the following steps:
1. Select 'Bluetooth' from the Main Menu, and then press the 'OK' button to enter
(Ref.1).
2. Activate the Bluetooth connection on the Majority MP3 GO by entering the
'Bluetooth Switch Control' and select 'Bluetooth Open'. Press the 'OK' button
(Ref.1) to confirm, and then press the 'Back' button (Ref.4) to return to the
Bluetooth Menu.
3. Activate Bluetooth on your device, making sure your device is visible and ready
to pair. Search for devices on the Majority MP3 Go. While searching, a flashing
icon (indicating Bluetooth) will be visible on the screen next to the battery icon,
representing that the player is searching for available devices around to pair
with.
4. A list of devices found will then be displayed on the Majority MP3 GO. Select
the one you would like to pair with, and then press the 'OK' button (Ref.1) to
confirm, match and connect. Wait a few seconds for the connection to be
established. Once successfully paired, the screen will read 'Connected' and you
can now start playing music from the Majority MP3 GO via your Bluetooth audio
output device.
If the connection fails, please try the same steps again as described at points 2, 3, 4.
To disconnect the Majority MP3 GO, from a device already paired with remove from
yours from the 'List of devices'.
To switch off Bluetooth on the Majority MP3 GO, access the 'Bluetooth Switch Control'
and select 'Bluetooth OFF'.

Bluetooth

EN
9