Gigabyte E143-E30-AAB1 User Manual page 126

2-3-5-1 I3C/I2C Configuration Options
Parameter
I3C/I2C Configuration
Options
I3C/I2C 0/1/2/3 Enable
I2C 4/5 Enable
Release SPD Host Control
PMFW Poll DDR5 Telemetry
Ixc Telemetry Ports Fence
Control
I2C SDA Hold Override
APML SB-TSI $ RMI Mode
I3C Mode Speed
I3C Push Pull HCNT Value
I3C SDA Hold Override
Description
Options available: Both Disabled, I3C Enabled, I2C Enabled, Auto.
Default setting is Auto.
Options available: Disabled, Enabled, Auto. Default setting is Auto.
Options available: Disabled, Enabled. Default setting is Disabled.
Options available: Disabled, Enabled. Default setting is Enabled.
Options available: Disabled, Enabled. Default setting is Disabled.
Options available: Disabled, Enabled, Auto. Default setting is Auto.
Options available: I3C, I2C. Default setting is I3C.
Options available: SDR2(6MHz), SDR0(12.5MHz), Auto. Default setting is
Auto.
SCL push-pull High count for I3C transfers targeted to I3C devices.
Override I3C SDA Hold value.
Options available: Disabled, Enabled, Auto. Default setting is Auto.
BIOS Setup
- 126 -