Advertisement
Available languages
Available languages
8 | English
Product Description and
Specifications
Read all the safety and general instructions.
Failure to observe the safety and general in-
structions may result in electric shock, fire
and/or serious injury.
Please observe the illustrations at the beginning of this oper-
ating manual.
Intended Use
The power tool is intended for making separating cuts and
cut-outs in wood, plastic, metal, ceramic plates, rubber and
laminate/HPL (High Pressure Laminate) while resting firmly
on the workpiece. It is suitable for straight and curved cuts
with mitre/bevel angles of up to 45°. The saw blade recom-
mendations are to be observed.
Product Features
The numbering of the product features refers to the diagram
of the power tool on the graphics page.
(1) Stroke rate preselection thumbwheel
(2) Lock-off function for On/Off switch
(3) On/off switch
(4) Hex key
(5) Rechargeable battery release button
a)
(6) Rechargeable battery
(7) Handle (insulated gripping surface)
(8) Orbital action adjusting lever
(9) Base plate
a)
(10) Saw blade
(11) Shock protection guard
(12) Guide roller
(13) Saw blade receptacle
(14) Worklight
(15) Anti-splinter guard
a)
(16) Hood for dust extraction
a)
(17) Extraction outlet
a)
(18) Extraction hose
(19) Base plate screw
(20) Scale for mitre/bevel angles
(21) Guide for parallel guide
(22) Locking screw for parallel guide
(23) Parallel guide with circle cutter
a)
(24) Circle cutter centring tip
a) Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
1 609 92A 8WA | (02.11.2023)
Technical Data
Cordless jigsaw
Article number
Rated voltage
No-load stroke rate n₀
Stroke
Max. cutting depth
– in wood
– in aluminium
– in steel (unalloyed)
Max. cutting angle (left/right)
Weight according to EPTA-Pro-
cedure 01:2014
Recommended ambient temper-
ature during charging
Permitted ambient temperature
during operation
storage
Compatible rechargeable batter-
ies
Recommended rechargeable bat-
teries
a)
Recommended chargers
A) Measured at 20–25 °C with rechargeable battery GBA 18V
4.0Ah.
B) Depends on battery in use
C) Limited performance at temperatures < 0 °C
Values can vary depending upon the product and are subject to ap-
plication and environmental conditions. For further information
www.bosch-professional.com/wac.
Rechargeable battery
Bosch sells some cordless power tools without a re-
chargeable battery. You can tell whether a rechargeable bat-
tery is included with the power tool by looking at the pack-
aging.
Charging the battery
Use only the chargers listed in the technical data. Only
u
a)
these chargers are matched to the lithium-ion battery of
your power tool.
a)
Note: Lithium-ion rechargeable batteries are supplied par-
tially charged according to international transport regula-
tions. To ensure full rechargeable battery capacity, fully
charge the rechargeable battery before using your tool for
the first time.
GST 183‑LI
3 601 EB7 0..
V=
A)
−1
min
mm
mm
mm
mm
°
kg
°C
°C
–20 to +50
C)
and during
GBA 18V...
ProCORE18V...
GBA 18V...
ProCORE18V...
Bosch Power Tools
18
0–3300
20
95
15
8
45
B)
2.0–3.0
0 to +35
≥ 4,0 Ah
≥ 4,0 Ah
GAL 18...
GAX 18...
GAL 36...
Advertisement
