Operation; Operating Instructions - CAE 2765 Operating Instructions Manual

Table of Contents

Advertisement

3.0

OPERATION

3.1

Operating Instructions

Company:
Place of work:
Operation:
Risks to People and the Environment
Protective Measures and Rules of Conduct
Response to faults and hazards
First Aid
Emergency number:
Maintenance
Noise danger
Danger of being caught on machine
Danger due to uncontrolled moving parts
Danger from charged dust in the brake system
Wear close-fitting clothes
Do not wear a watch, rings, chains or similar jewellery when working
Wear ear protection and safety goggles.
Longer hair should be secured by a hair net or other measure
Only use impact wrenches that don't blow air on the wheel rim.
Clean wheels and tires only when wet to avoid dust build-up; if possible, use wheel washing
systems.
Remove dust on the brake drums with an extraction bell with suitable industrial vacuum cleaners.
Use category U equipment for asbestos-free dusts and category K1 for asbestos-containing dusts.
(Observe current GUV regulations)
Damaged tires must not be used.
When inflating the tire, set up a guard to catch any flying parts. Keep people out of the danger area.
Tire filling must be monitored and the maximum permissible assembly air pressures must not be
exceeded.
Only operate motor-driven wheel balancers with a protective hood.
For large wheels of trucks and self-driving machines:
-
On machines with vertical wheels, work with heavy tires (for example, EM tires) must be
carried out by two people.
-
For tires with a diameter >1.4 m or a weight >200 kg, fall-protection devices must be used.
Machine defects must be reported to the manufacturer immediately
Switch off the machine and secure against unauthorised restart
Damage should only be repaired by qualified personnel
Inform first aiders (see alarm/emergency plan).
Treat injuries immediately.
Enter into the accident book
Contact emergency services for serious injuries.
Repair only by instructed and trained persons
Disconnect or secure the machine from the mains power supply for set-up, adjustment,
maintenance or servicing
Clean the machine after operation is ended
Annual check of the machine by an authorised and trained person
Operating Instructions
for
Tire Servicing
_ Ambulance service:
- 24 -
Date:
Signature:

Advertisement

Table of Contents
loading

Related Products for CAE 2765

This manual is also suitable for:

2725

Table of Contents