Safety Precautions - Nakayama EM4250 Manual

EN

7. Safety Precautions

A) Always operate with the deflector or grass catcher in the correct position.
B) Always stop the motor before removing the grass catcher or adjusting the height of cutting position.
1. Before mowing, remove all foreign objects from the lawn which may be thrown by the machine.
While mowing, stay alert for any foreign objects which may have been missed (Fig.5A).
2. Never lift the rear of the mower while starting the motor or during normal operation (Fig.5B).
3. Never place your hands or feel underneath the under-pan or into the rear discharge chute while the motor is running
(Fig.5C).
Fig.5A
8. Starting
Fig.6A
Fig.6C
For The Best Results When Mowing
Clear lawn of debris. Be sure that the lawn is clear of stones, sticks, wire or other foreign objects which could be accidentally
thrown out by the mower in any direction and cause serious personal injury to the operator and others as well as damage to
property and surrounding objects.
Do not cut wet grass. For effective mowing do not cut wet grass because it tends to stick to the underside of the deck
preventing proper mowing of the grass clippings.
Cut no more than 1/3 the length of the grass. The recommended cut for mowing is 1/3 the length of the grass. Ground speed
will need to be adjusted so the clippings can be dispersed evenly into the lawn. For especially heavy cutting in thick grass it
may be necessary to use one of the slowest speeds in order to get a clean well mowed cut. When mowing long grass you may
7
Fig.5B
Fig.6B
Start the motor as follows (Fig.6C)
A) Press the safety push-button (1).
B) And meanwhile, pull the switch handle (2), and keep it in grasp.
If you release the switch handle, the motor will stop.
CAUTION! The blade starts turning as soon as the motor is started.
WARNING! Cutting elements continue to rotate after the motor is switch off.
WWW.NAKAYAMATOOLS.COM
Starting
Before connecting up the lawn mower to the electric
power supply, make sure that the mains supply voltage is
230-240V~ 50Hz.
Before start the lawn mower, fixed the extension cord
with the machine as the Fig.6A /Fig.6B shown.
Fig.5C