Table of Contents
Advertisement
EN
Charging the battery
The battery is only lightly charged when it leaves the factory. The battery must be fully charged before the tool is used for the first time.
The charger is equipped with charging indicator lamp. During charging the indicator light will light up red. After completion of charging, the light turns green.
Maintenance
Regular inspection and cleaning reduces the necessity for maintenance operations and will keep your tool in good working condition. The motor must be
correctly ventilated during tool operation. Avoid blocking the air inlets and vacuum the ventilation slots regularly.
WARNING: Always remove the rechargeable battery from the device before all work.
• Replace all damaged or worn parts to ensure the power tool is always ready for safe operation.
• Clean ventilation slots and openings with a brush.
• DO NOT use any solvents or cleaning agents containing chemicals which could damage the plastic parts. Wipe the housing clean with a cloth.
• Always store the leaf blower in a dry, frost-free location beyond the reach of children.
• Store and charge your rechargeable batteries at a cool location. Temperatures above or below normal room temperature shorten the lifespan of the
rechargeable batteries.
• Do not store rechargeable batteries when discharged. Wait until the rechargeable battery has cooled down and charge it completely.
• Rechargeable batteries gradually lose their charge. The higher the temperature, the quicker they lose their charge. For longer storage periods, recharge the
rechargeable battery every one or two months. This will extend the lifespan of the rechargeable battery.
Handling and Storage
Care must be taken when handling this product.
Dropping this power tool could have an effect on its accuracy and could also result in personal injury. This product is not a toy and must be respected.
Environmental conditions can have a detrimental effect on this product if neglected.
Exposure to damp air can gradually corrode components.
If the product is unprotected from dust and debris, components will become clogged.
If not cleaned and maintained correctly or regularly the machine will not perform at its best.
Disposal
At the end of the machine's working life or when it can no longer be repaired, ensure that it is disposed of according to national regulations.
— Contact your local authority for details of collection schemes in your area.
In all circumstances:
• DO not dispose Of power tools with domestic waste.
• DO not incinerate.
• Do not dispose of as unsorted municipal waste.
Warning!
• Do not put battery pack in fire or mutilate; cells may burst or release toxic materials.
• Do not short circuit cells, may cause burns.
• The battery pack must be removed from the appliance before it is scrapped.
• The battery pack is to be disposed of safely.
• Do not mutilate batteries; corrosive electrolyte will be released.
• Do not dispose of batteries or cells in a charged condition.
Expired batteries must be recycled/disposed of in accordance with the appropriate regulation or legislation. They should be returned to your local warranty
agent/stockist.
5
Slide the battery onto the charger
Connect the charger to a suitable main socket. The red charging light comes on.
The charger may become warm and buzz slightly during charging. This is normal and does not indicate a
fault.
After about an hour the charging indicator light turns green to indicate that charging is completed.
Remove the battery from the charger.
Disconnect the charger from the main socket after charging.
LED worklight
The driver is equipped with an LED worklight that facilitates working in inaccessible, dark places.
WWW.NIKOLAOUTOOLS.GR
Advertisement
Table of Contents
