Connecting To An Amplifier Equipped With A Digital Audio Input - Zenith DVP7771 Installation And Operating Manual

Connecting to an amplifier equipped with a digital audio input

2 Channel Digital Stereo
You can enjoy the dynamic sound of 2 Channel Digital Stereo by connecting this DVD player to a receiver equipped
with a digital audio input and speaker system (right and left front speakers).
Right side of unit
To AUDIO IN/OUT jack
Optical cable (Not supplied)
for all connections
• Connect the OPTICAL OUT jack of the player to the "OPTICAL" input of a Receiver or Processor.
• Refer to the owner's manual of your audio equipment as well.
• Before you connect the DVD player to other equipment, be sure to turn off the power and unplug all of the equipment
from the wall outlet before making any connections.
• The output sound of the DVD player has a wide dynamic range. Be sure to adjust the receiver's volume to a moderate
listening level. Otherwise, the speakers may be damaged by a sudden high volume sound.
• Turn off the receiver before you connect or disconnect the DVD player's power cord. If you leave the receiver power
on, the speakers may be damaged.
Amplifier equipped with a
digital audio input
To digital audio input
(optical)
55
Front speaker
(right)
Front speaker
(left)