Playing A Disc; Basic Playback - Zenith DVP7771 Installation And Operating Manual

Playing a Disc

Basic Playback

- Prepare the power supply.
1. Open the outer cover and slide the ON/OFF switch
to the left to turn unit on.
Power indicator lights and then the indicator will disappear
after 5 seconds.
2. Press OPEN to open the disc lid and insert a disc
with the side you want to play label up. Close the
disc lid by hand.
• If the disc is placed in upside down (and it is a single-sided
disc), "NO DISC" or "DISC ERROR" appears on the TV
screen.
• If you insert an audio CD, the CD indicator lights up in the
display window. The title number does not appear.
• After playing back all of the chapters in the title, the DVD
player automatically stops and returns to the menu screen.
3. Press PLAY to start play.
4. Adjust the volume.
• Place a disc with the playback side down on the
spindle, and push gently on the center of the disc so
it goes into position.
• Confirm LCD MODE position by pressing LCD
MODE button.
• If there is no picture on the LCD, check that the AV
in/Out switch is set to AV Out mode.
COLOR
2
1
3
A Adjusting color intensity
Use the COLOR slide switch –/+ to adjust the color shade.
– ; black and white
+ ; color
• Power consumption increases with the level of color.
A Adjusting the brightness
Use the BRIGHTNESS slide switch –/+ to adjust the bright-
ness.
– ; dark
+ ; light
20
DVD CD
Brightness
LCD MODE
4