Advertisement
Parts List
A
Table Top
C
Support Tube
E
PVC Bolt Cover
H
M6 x 40mm Bolt
Do not discard any of the packaging until you have checked that you have all the parts and the pack of fixings.
Helpful advice before you begin:
1. We suggest you spend a short time reading through this leaflet and then follow the simple
step by step instructions.
2. Do not discard any of the packaging until you have checked that you have all the parts and
the pack of fittings.
3. Assemble this product on a soft surface.
4. To ensure an easier assembly, we strongly advise that all fittings are only finger tightened
during initial assembly. Only upon completion of the assembly should all fixing points be fully
tightened.
5. We recommend a periodic check on all fixing points to make sure they remain fully tightened.
6. Keep fittings out of children's reach.
7. Do not use any other tools other than those recommended to build this product.
8. Please do not use substitute parts. Use only additional or replacement parts supplied by Kettler.
9. In the unlikely event that this product has missing or damaged parts, please visit our website
www.kettler.co.uk/shop.
x1
x1
F
M6 x 20mm Bolt
x10
I
Steel Washer
x4
B
Table Leg
D
Glass Top
G
M6 x 30mm Bolt
x2
J
Allen Key
x10
x2
x1
x4
x1
Advertisement
