Advertisement
Turning on the TV
You can simply operate the TV functions, using the button.
Power On (Press)
Power Off
(Press and Hold)
1)
Menu Control (Press
Menu Selection (Press and Hold
1) All running apps will close, and any recording in progress will stop.
(Depending on country)
2) You can access and adjust the menu by pressing the button when TV is on.
3) You can use the function when you access menu control.
Note
• If the TV is turned on for the first time after it was shipped from the
factory, initialisation of the TV may take a few minutes.
• Your TV's OSD (On Screen Display) may differ slightly from that shown
in this manual.
• The device must be easily accessed to a location outlet near the access.
Some devices are not made by turning on / off button, turning off the
device and unplugging the power cord.
• Only use the power button when the TV screen and the Zero Connect Box
are connected.
Starting TV
)
2)
)
3)
Using hands-free voice control
To use hands-free voice control, follow these steps.
• The voice recognition microphone is on the front bottom of the Zero
Connect Box.
1 If you direct the front LED of the Zero Connect Box towards the user, you
can use the voice recognition function smoothly.
2 Adjust the direction of the sliding button toward the TV Screen receiver by
turning the dial left or right.
→ [
] → [General] → [AI Service] → [Voice
3 From the
Recognition Settings] screen, turn on the [Use Hands-free Voice Control]
menu. (Depending on model)
5
Advertisement
