Vcr Setup; Cable Tv Setup; External A/V Source Setup - Zenith Z17LZ5R Operating Manual

Installation
External Equipment Connections Continued
External Equipment Connections Continued

VCR Setup

VCR Setup
- In Video mode, TV automatically reverts to TV mode if the
fcr button or flashbk buttons are pressed.
Connection 1
Set VCR switch to 3 or 4 and then tune TV to the same
channel number.
Connection
2
1. Connect the audio/video output jacks on VCR to the corre-
sponding input jacks on the TV. When connecting the TV to
a VCR, match the jack colors (Video = yellow, Audio Left =
white, and Audio Right = red).
2. Insert a video tape into the VCR and press PLAY on the
VCR. (Refer to the VCR owner's manual.)
3. Use the TV/VIDEO button on the remote control to select
Video1 or Video2. (If connected to S-VIDEO on side panel,
select the S-Video external input source.)
Cable TV Setup
Cable TV Setup
- After subscribing to a local cable TV service and installing a converter, you can watch cable TV programming.
- For further cable TV information, contact a local cable service provider.
Connection 1
1. Select 3 or 4 with channel switch on cable box.
2. Tune the TV channel to the same selected output channel
of cable box.
3. Select channels at the cable box or with the cable box
remote control.
Connection
2
1. Connect the audio/video output jacks on Cable Box to the
corresponding input jacks on the TV. When connecting the
TV to Cable Box, match the jack colors
(Video = yellow, Audio Left = white, and Audio Right = red).
2. Use the TV/VIDEO button on the remote control to select
Video1 or Video2.
3. Select channels with the cable box remote control.
External A/V Source Setup
External A/V Source Setup
Connections
Connect the audio/video output jacks on the external A/V
equipment to the corresponding input jacks on the TV.
When connecting the TV to external A/V equipment,
match the jack colors (Video = yellow, Audio Left = white,
and Audio Right = red).
Viewing Setup
1. Turn on the external A/V equipment.
2. Use the TV/VIDEO button on the remote control to
select Video1or Video2.
3. Operate the corresponding external equipment.
Refer to external equipment operating guide.
12
Y P
B
AC INPUT
COMPONENT(480i/480p/720p/1080i)
DVD/DTV IN
Typical
Antennas
ANT IN
S-VIDEO OUT
ANT OUT
CH3 CH4
Direct
Connection
Y P P
B R
AC INPUT
COMPONENT(480i/480p/720p/1080i)
DVD/DTV IN
PC INPUT ANT IN
S-VIDEO VIDEO (MONO) L AUDIO R
+75 Ω
VIDEO IN
External
Equipment
P H/P S-VIDEO VIDEO (MONO) L AUDIO R PC INPUT
R
VIDEO IN
2
1
VCR
IN
VIDEO (R) AUDIO (L)
H/P S-VIDEO VIDEO (MONO) L AUDIO R PC INPUT
VIDEO IN
1
2
(R) AUDIO (L) VIDEO
TV
VCR
Cable Box
PC
SOUND
Camcorder
Video Game set
R AUDIO L VIDEO
PC
ANT IN
SOUND
+75 Ω
ANT IN PC
SOUND
+75 ‰
RF Cable