Source Hookup Options - Zenith R50V26 Operating Manual

Sources/Equipment Hookup Options
Choose the picture and sound source you want to see and hear
ANTENNA/
CABLE 1
TO CABLE
ANTENNA/
CABLE 2
VARIABLE
AUDIO OUT
Input 5
S-Video Video L/Mono
1
On the remote, press SOURCE repeatedly to choose from
the available viewing sources connected to the TV.
Antenna 1 - 2: Antenna/Cable inputs on TV back near
Jackpack, Over-the-Air Antenna or Cable service signal
source.
Input 1: on TV Rear Jackpack,
Set of Composite Audio/Video Input jacks.
Input 2: on TV Rear Jackpack,
Set of Composite Audio/Video Input jacks.
Input 3: on TV Rear Jackpack,
Set of Component/Composite Audio/Video Input jacks.
Input 4: on TV Rear Jackpack,
Set of Component/Composite Audio/Video Input jacks.
Input 5: on TV Front Jackpack,
Set of Composite Audio/Video Input jacks.
The source equipment you intend to view should be turned on.
Inputs 3 and 4 (Y-VIDEO) can also be used for standard video input.
P A G E 2 0
INPUT 1 INPUT 2 INPUT 3
INPUT 4
BOX
S-VIDEO S-VIDEO
VIDEO VIDEO Y/VIDEO
Y/VIDEO
MONO/L
MONO/L
MONO/L MONO/L
P P
B B
R
R P P
R R R
R
R
MONITOR
OUT
S-VIDEO
VIDEO
L
R
Connection Notes
• Be sure to insert connection cord plugs securely when
connecting to front panel jacks, or the played back
image may be abnormal.
• For S-Video, use the S-Video cable in place of the
standard video cable.
• S-Video Monitor Out only works when an S-Video
device is connected to either Inputs 1, 2, or 5.
• For monaural VCR sound output, insert the VCR audio
out cable into the Left audio in jack on the TV.
Camcorder
Component
Video
VCR
S-Video VCR
DVD Player
Other
Typical Viewing Sources
206-3806