Installation; Accessories / Power Connections - Zenith L17W36DVD Operating Manual

Installation

Installation
Accessories
Accessories
Operating Guide
PC Signal Cable
Power Connections Power Connections
* Caution: Please be sure to connect the TV to the AC power adapter
before connecting the TV's power plug to a wall power outlet.
a. Remove the connection panel cover as shown below.
b. Connect the antenna cable to the antenna input port on the TV.
c. Connect the AC adapter plug to the power input jack on the TV.
d. Connect the power cord to the AC adapter first, then plug the
power cord into the wall power outlet.
e. Reinstall the connection panel cover.
NOTES
a. If the TV feels cold to the touch, there may be a small "flicker" when it is turned on.
This is normal, there is nothing wrong with TV.
b. Some minute dot defects may be visible on the screen, appearing as tiny red, green, or blue spots. However, they have no
adverse effect on the monitor's performance.
c. Avoid touching the LCD screen or holding your finger(s) against it for long periods of time.
Doing so may produce some temporary distortion effects on the screen.
1.5V
AAA Batteries
PC Sound Cable
AC Adapter
Power Cord
- Arrange the wires
a
c
Installation
power
open/close tv/video
mute mts/audio
pip cc/sub-t
pip ch pip ch
pip swap pip input
menu ch exit
vol enter vol
ch
1 2 3
4 5 6
7 8 9
video 0 audio
3D sound a r c fcr/zoom
skip play/pause /II skip
scan stop scan
disc menu title menu program
repeat a-b flashbk/angle
sleep position size
still scan multimedia
Remote Control
Tie Bands
with the tie bands.
b
d
9