Installation Instructions - Zenith L17W36DVD Operating Manual

Installation

Installation Instructions

Installation Instructions
Rear A/V Cover
Rear A/V Cover
* The connection panel is hidden behind the A/V cover.
a. Remove the cover.
b. Install wires as necessary.
c. Reinstall the cover. Position the A/V cover with the TV
back panel, tilt it back as shown.
d. Align the holes on the TV back panel with the two tabs
on the rear A/V cover and insert.
e. Close cover.
Adjusting the TV V iewing
Adjusting the TV V iewing
- You can adjust the vertical viewing angle of the TV
between 3° and 12°.
Installation on the W
Installation on the W
- An optional wall mount is available for this TV, see your dealer.
For installation, follow the instructions provide with the optional wall mount.
10
Angle
Angle
all
all
W ire Holders
W ire Holders
- Thread, then pull the wires through the hole on the TV
stand.
Swivel Stand
Swivel Stand
- The TV can be conveniently swiveled on its stand 30° to
the left or right to provide the optimum viewing angle.