Operation; Installation / Mounting - TECshow STRATUS 700LED User Manual

2. OPERATION

• Before connecting this unit to the mains power
supply for the first time you must first fill the fluid
tank with fog fluid and check that the nozzle is
clean and unobstructed.
• This fog machine has been designed to function
on a mains power supply of 230V 50Hz and has
been fitted with a suitable power plug for use
with your local voltage. Check the c able on the
unit and the power plug for the correct voltage.
• Place the machine on a level surface and loosen
the cap of the fluid tank to fill with quality water
based fog fluid. We recommend use of pointed
fog fluid as it has been specially formulated for
use with our foggers.
• Plug the remote control unit into the socket at
the rear and switch on to allow time to preheat
Once the machine has reached temperature and
is ready to o perate the greed light on the remote
control will illuminate. Push the button on the
remote control when lit and hold for prolonged
bursts of fog.

3. INSTALLATION / MOUNTING

The fogger must be used in a horizontal position on a
level surface or it may be mounted using the bracket
provided. Ensuring that the fog is not shooting
directly at anyone s face.
Whatever method of installation you choose, the
fogger must not have more than a 15 degree angle of
inclination. We always suggest that for safety purpose
use of a suitable handing clamp and safety cable is
essential.
• Always monitor fog fluid level as running the
machine with no fluid could cause permanent
damage. Please do not touch or place anything in
close proximity to the nozzle during operation or
preheat as there is a danger of burns.
• It is normal for your fogger to have a recycling
period after long bursts when the unit will shut
itself down for a short period in ord er to heart
up to temperature. During this time no fog can
be produced. The green light on the remote will
illuminate when the unit is ready for action again.
• Due to the high operating temperature of fog
machines it is advised that the effect be used in
well ventilated areas taking care not to obstruct
the air vents. After use , allow time to cool for
safety before moving or touching.
English Version | Tecshow STRATUS 700 LED
P. 3