Page 2
® • Technical Documentation • 2011 CEDIMA Translation of the original operating manual Page 2 ® • Technical Documentation • All rights reserved as per DIN ISO 16016 • „Subject to modifications due to progressive development“ • • CEDIMA...
Trouble-shooting (what happens if ...?) ................. 40 Electric connection diagram ................... 43 Terms of warranty ......................44 ® Page 3 • Technical Documentation • All rights reserved as per DIN ISO 16016 • „Subject to modifications due to progressive development“ • • CEDIMA...
D-29227 Celle, 27.04.2010 Axel Fischer (managing director) ® Page 5 • Technical Documentation • All rights reserved as per DIN ISO 16016 • „Subject to modifications due to progressive development“ • • CEDIMA...
Page 6 ® • Technical Documentation • All rights reserved as per DIN ISO 16016 • „Subject to modifications due to progressive development“ • • CEDIMA...
Page 7
• The saw is designed to support adjustable mitre cuts up to 45°. Fig. 1.2 Table saw CTS•26 XL ® Page 7 • Technical Documentation • All rights reserved as per DIN ISO 16016 • „Subject to modifications due to progressive development“ • • CEDIMA...
Page 8
L Sound power level L 96 dB(A) While cutting operation, higher values are possible! Page 8 ® • Technical Documentation • All rights reserved as per DIN ISO 16016 • „Subject to modifications due to progressive development“ • • CEDIMA...
Page 9
Respective diamond saw blades are to be found in the actual price-list. CEDIMA ® For special applications please ask directly. CEDIMA ® Page 9 • Technical Documentation • All rights reserved as per DIN ISO 16016 • „Subject to modifications due to progressive development“ • • CEDIMA...
Using the machine for purposes other than pervising and notifying special organizational Page 10 ® • Technical Documentation • All rights reserved as per DIN ISO 16016 • „Subject to modifications due to progressive development“ • • CEDIMA...
Page 11
• All spare parts and tools must comply with the work, the soil-bearing capacity and the required technical requirements specified by the manuf- ® Page 11 • Technical Documentation • All rights reserved as per DIN ISO 16016 • „Subject to modifications due to progressive development“ • • CEDIMA...
Page 12
- The secure seat of the diamond saw blade restarting! (mount according to the operating manual of the manufacturer with original screws)! Page 12 ® • Technical Documentation • All rights reserved as per DIN ISO 16016 • „Subject to modifications due to progressive development“ • • CEDIMA...
Page 13
• Only use rated fuses with the correct current in- ning rags! tensity/Ampere! Switch off the machine imme- ® Page 13 • Technical Documentation • All rights reserved as per DIN ISO 16016 • „Subject to modifications due to progressive development“ • • CEDIMA...
Page 14
Page 14 ® • Technical Documentation • All rights reserved as per DIN ISO 16016 • „Subject to modifications due to progressive development“ • • CEDIMA...
Page 15
• Always disconnect the machine from its mains supply even when performing minor relocati- ons! ® Page 15 • Technical Documentation • All rights reserved as per DIN ISO 16016 • „Subject to modifications due to progressive development“ • • CEDIMA...
• Place the table saw in such a way, that it causes ® neither hindrance when being operated nor danger Please make sure that no part of your CEDIMA table to personnel and/or third parties! saw CTS•26, L, or XL is missing or damaged! The scope of the delivery can be found in chapter 1.3.
Page 17
Fig. 3.6 Lateral splash guard mounted • Hook in the front splash guard (Fig. 3.7). ® Page 17 • Technical Documentation • All rights reserved as per DIN ISO 16016 • „Subject to modifications due to progressive development“ • • CEDIMA...
Page 18
(Fig. 3.12 and 3.13). Fig. 3.13 Splash guard mounted Page 18 ® • Technical Documentation • All rights reserved as per DIN ISO 16016 • „Subject to modifications due to progressive development“ • • CEDIMA...
Page 19
(Fig. 3.16)! the machine! ® Page 19 • Technical Documentation • All rights reserved as per DIN ISO 16016 • „Subject to modifications due to progressive development“ • • CEDIMA...
Page 20
The water container must be cleaned regularly! Page 20 ® • Technical Documentation • All rights reserved as per DIN ISO 16016 • „Subject to modifications due to progressive development“ • • CEDIMA...
Page 21
Note: See section 7.1! Re-sharpen blunt diamond saw blades! ® Page 21 • Technical Documentation • All rights reserved as per DIN ISO 16016 • „Subject to modifications due to progressive development“ • • CEDIMA...
Page 22
Fig. 3.21 Lid of the blade guard open kept in clean condition to ensure that the blade can be mounted properly! Page 22 ® • Technical Documentation • All rights reserved as per DIN ISO 16016 • „Subject to modifications due to progressive development“ • • CEDIMA...
Page 23
To set the depth stop, proceed as follows: 1. Mount the diamond saw blade! ® Page 23 • Technical Documentation • All rights reserved as per DIN ISO 16016 • „Subject to modifications due to progressive development“ • • CEDIMA...
Page 24
Fig. 3.29 Auxiliary table, hinged (angle stop of the table saw attached to the auxiliary table) Page 24 ® • Technical Documentation • All rights reserved as per DIN ISO 16016 • „Subject to modifications due to progressive development“ • • CEDIMA...
• The work piece is placed onto the work table and is kept with the respective hand in such a ® Page 25 • Technical Documentation • All rights reserved as per DIN ISO 16016 • „Subject to modifications due to progressive development“ • • CEDIMA...
Page 26
3.7.2! a predefined cutting depth but can be moved free- Page 26 ® • Technical Documentation • All rights reserved as per DIN ISO 16016 • „Subject to modifications due to progressive development“ • • CEDIMA...
Page 27
• Carry out care- and maintenance according to chapter 5! ® Page 27 • Technical Documentation • All rights reserved as per DIN ISO 16016 • „Subject to modifications due to progressive development“ • • CEDIMA...
The table saw must be cleaned after each use and and sealing material! before each repair, maintenance work! Page 28 ® • Technical Documentation • All rights reserved as per DIN ISO 16016 • „Subject to modifications due to progressive development“ • • CEDIMA...
Page 29
- Switch OFF the machine immediately you no- by a specialized electrician (special work- tice any of the above mentioned damages! The ® shop) or by CEDIMA table saw must be repaired in a specialized ® workshop or by CEDIMA...
Page 30
*) To concretise, see the BG information “selecting and operating the system and operating materials on building sites“ (BGI 608). Page 30 ® • Technical Documentation • All rights reserved as per DIN ISO 16016 • „Subject to modifications due to progressive development“ • • CEDIMA...
Page 31
You will find the description of the maintenance work in the following appropriate chapters in this operating manual! ® ® The table may be acualised at any time by CEDIMA (e.g. respective technical necessities and developments). Optain information from CEDIMA...
Page 32
• dirty water and slurry must be removed from the water container/bucket (rinse out). Page 32 ® • Technical Documentation • All rights reserved as per DIN ISO 16016 • „Subject to modifications due to progressive development“ • • CEDIMA...
Page 33
Fig. 5.5)! Fig. 5.6 „Clean“ guide rail and swivel cutting head (underside, bottom) ® Page 33 • Technical Documentation • All rights reserved as per DIN ISO 16016 • „Subject to modifications due to progressive development“ • • CEDIMA...
Page 34
Fig. 5.8 Loosening the holding screws of the bearings inthe following carried out in a specialized work- ® shop or by CEDIMA 3. Turn the eccentric with the 2 WS 17 span- ners until the guide carriage runs without 5.8.5 Adjusting the top bearings on the play (Fig.
Page 35
Fig. 5.12 Palm/star grip of the depth adjustment ® Page 35 • Technical Documentation • All rights reserved as per DIN ISO 16016 • „Subject to modifications due to progressive development“ • • CEDIMA...
Page 36
3. If necessary, move the end stop using slight knocks with a hammer (Fig. 5.17)! Page 36 ® • Technical Documentation • All rights reserved as per DIN ISO 16016 • „Subject to modifications due to progressive development“ • • CEDIMA...
Page 37
® Page 37 • Technical Documentation • All rights reserved as per DIN ISO 16016 • „Subject to modifications due to progressive development“ • • CEDIMA...
Page 38
Bild. 5.24 Adjustment possibilities of the swivel cutting head compensation spring Page 38 ® • Technical Documentation • All rights reserved as per DIN ISO 16016 • „Subject to modifications due to progressive development“ • • CEDIMA...
To transport the table saw, use a respective bas- ket or tub! ® Page 39 • Technical Documentation • All rights reserved as per DIN ISO 16016 • „Subject to modifications due to progressive development“ • • CEDIMA...
Align and refasten the guide rail before swivelling and after swi- velling (mitre cuts) on both ends Page 40 ® • Technical Documentation • All rights reserved as per DIN ISO 16016 • „Subject to modifications due to progressive development“ • • CEDIMA...
Page 41
Therefore we recommend you to read this operating manual carefully! ® Page 41 • Technical Documentation • All rights reserved as per DIN ISO 16016 • „Subject to modifications due to progressive development“ • • CEDIMA...
Page 42
Have the receiving flange replaced mond segments shrunken Play on the bearings Exchange the blade drive motor Page 42 ® • Technical Documentation • All rights reserved as per DIN ISO 16016 • „Subject to modifications due to progressive development“ • • CEDIMA...
Fig. 8.1 Circuit diagram of the electrics of the CTS•26, L, XL (230 Volt-Version) ® Page 43 • Technical Documentation • All rights reserved as per DIN ISO 16016 • „Subject to modifications due to progressive development“ • • CEDIMA...
Page 2 of 2 Pages Page 44 ® • Technical Documentation • All rights reserved as per DIN ISO 16016 • „Subject to modifications due to progressive development“ • • CEDIMA...
Page 45
To protect your interest and to conduct a proper inspec- ® Page 45 • Technical Documentation • All rights reserved as per DIN ISO 16016 • „Subject to modifications due to progressive development“ • • CEDIMA...