Table of Contents
Advertisement
4. Troubleshooting
4-1-7. No Video (Video CVBS)
Symptom
Audio is normal but no picture is displayed on the screen.
-
Check the Video CVBS source
-
Major
Check the SX1.
-
checkpoints
This may happen when the LVDS cable connecting the Main Board and the Panel is disconnected.
-
4
2
Diagnostics
Caution
Make sure to disconnect the power before working on the IP board.
4-16
Power indicator LED is off.
Lamp(Backlight) on, no video ?
Yes
Check the video source and
check the connection of video cable?
Yes
Does the CVBS data appear at
TP - SC_CVBS_IN ?
Yes
Does the digital data appear at
TP - O_TXCLK+, O_TXCLK-,
F_TXCLK+, F_TXCLK- ?
Yes
Check the LVDS cable?
Check the T-Con B'd?
Replace the LCD panel?
No
Check a set in the 'Stand-by mode'.
No
Input the video source properly.
Check JA701.
No
Change the Main Assy.
Check IC1102 (SX1).
No
Change the Main Assy.
No
Please, Contact Tech support.
Advertisement
Table of Contents
