Veracity LIGHTSPAN SC100 Quick Start Manual

APPLICATION DIAGRAM ETHERNET TO FIBRE
VPSU-12V-U
(LOW POWER)
POWER
SUPPLY
DATA
POWER
LIGHTSPAN can also be used in a 1U rack using VLS-1U. Ask Veracity for details of power supplies.
CONNECT LIGHTSPAN
| Connect the Fibre cable to the
LIGHTSPAN at the Camera end.
| Connect an Ethernet cable from the
LIGHTSPAN to the RJ45 port on the
Camera.
| Connect the LIGHTSPAN to the Power
Supply at the Camera end.
PRODUCT
DIMENSIONS
TECHNICAL SPECIFICATIONS
POWER
Connector
Supply voltage
Supply current
FIBRE INTERFACE
Socket
Cable
Rate
Wavelength
Range
ETHERNET INTERFACE
Connector
Cable
Rate
PHYSICAL | ENVIRONMENTAL
Dimensions (mm)
Weight
Compliance
Operating temperature
Relative humidity
Mounting
VLT-1N-SC100
2000M (1.24 MILES) ON FIBRE
TM
OPTICAL FIBRE CABLE
100BASE-FX FULL DUPLEX
FIBRE ETHERNET DATA ONLY
123 mm
QUICKSTART GUIDE
ETHERNET TO FIBRE MEDIA CONVERTER
VLT-1N-SC100
125Mbps 1310nm
| Connect the Fibre cable to the
LIGHTSPAN at the Switch end.
| Connect an Ethernet cable from the
Switch to the RJ45 port on the
LIGHTSPAN at the Switch end.
| Connect the LIGHTSPAN to the Power
Supply at the Base end.
Detachable screw terminal
8-57 volts DC or 20-28 volts AC
100mA (12V), 50mA (24V)
SC Duplex
Multimode optical fibre (OM1 etc.)
125Mbps 100Base-FX
1310nm
up to 2,000m [1.24miles]
RJ45 copper Ethernet connector
Patch or crossover, auto-detected
100Base-TX full-duplex only
L123, W36, H23 (inc brackets)
100g / 3.52oz]
FCC, CE, RoHS, UKCA, BS EN 50121-4 (rail)
-10°C to 70°C [14 °F to 158°F]
85% non-condensing
Wall mounting brackets inc.
24 units/1U rackmount optional.
VLT-1N-SC100
LIGHT
SPAN
SC100
TM
POWER
SUPPLY
VPSU-12V-U
(or share PSU with camera)
36 mm 36 mm
®