Changing The Basic Set- Tings; Programme Counter; Calling Up The Programme Counter; Cleaning And Servicing - Bosch WAN24293BY User Manual And Installation Instructions

Table of Contents

Advertisement

15.2 Changing the basic set-
tings
Set the programme selector to po-
1.
sition 1.
Press Start / Reload 
2.
same time, turn the programme
selector to position 2.
a The display shows the current
value.
Set the programme selector to the
3.
required position.
→ "Overview of the basic settings",
Page 32
To change the value, press Fin-
4.
ished in  .
To save the changes, switch off
5.
the appliance.

Programme counter

16 Programme counter
The program counter displays the
Programme counter
number of finished programmes.
16.1 Calling up the pro-
gramme counter
Set the programme to position 1.
1.
Press Start / Reload 
2.
the programme to position 2 at the
same time.
Set the programme to position 5.
3.
 and, at the
and set
Programme counter en

Cleaning and servicing

17 Cleaning and servi-
cing
To keep your appliance working effi-
Cleaning and servicing
ciently for a long time, it is important
to clean and maintain it carefully.
17.1 Cleaning the drum
CAUTION
Risk of injury!
Permanently washing at low temper-
atures and a lack of ventilation for
the appliance may damage the drum
and cause injury.
Regularly run a programme for
cleaning the drum or wash at tem-
peratures of at least 60 °C.
Leave the appliance to dry after
every operation with the door
open, and leave the detergent
drawer to dry.
Run the
⁠   Drum Clean pro-
gramme without laundry and with a
cleaning agent for caring for the in-
side of the appliance
→ "Accessories", Page 27 or with
washing powder that contains
bleach.
17.2 Cleaning the detergent
drawer
Pull out the detergent drawer.
1.
33

Advertisement

Table of Contents
loading

Table of Contents