Resuming The Programme When The Programme Status Is Rinse Hold; Unloading The Laundry; Switching Off The Appli- Ance; Childproof Lock - Bosch WAN24293BY User Manual And Installation Instructions

13.13 Resuming the pro-
gramme when the pro-
gramme status is Rinse
Hold
Requirements
¡ Rinse Stop is activated.
→ "Buttons", Page 22
¡ The last rinse cycle of the set pro-
gramme has ended and the laun-
dry is in the rinsing water.
Set the Spin ⁠ programme or a
1.
programme for draining the water.
→ "Programmes", Page 23
Press Start / Reload
2.
13.14 Unloading the laundry
Open the door.
1.
Remove the laundry from the
2.
drum.
13.15 Switching off the appli-
ance
Turn the programme selector to
1.
Off .
Wipe the rubber gasket dry and re-
2.
move any foreign objects.
Leave the appliance door and de-
3.
tergent drawer open so that resid-
ual water can evaporate.
a The display shows
a The control elements are locked.
a The childproof lock remains active
.
a

Childproof lock

14 Childproof lock
Secure your appliance against being
Childproof lock
operated unintentionally using the
controls.
14.1 Activating the childproof
lock
Press and hold the two
▶
buttons for approx. 3 seconds.
even after the appliance has been
switched off and in the event of a
power cut.
14.2 Deactivating the child-
proof lock
Requirement: To deactivate the
childproof lock, the appliance must
be switched on.
Press and hold the two
▶
buttons for approx. 3 seconds.
goes out in the display.
Childproof lock en
⁠ 3 sec.
.
⁠ 3 sec.
31