Kzzi Z98 Manual

BASIC INFORMATION
折线位置
391.7(L)×151.5(W)×41.7(H)±2
TOGGLE SWITCH FUNCTION
BLUETOOTH CONNECTIVITY
折线位置
2.4G CONNECTIVITY
2.4G mode: use the toggle to select the 2.4G icon， and click the Push Switch. Keyboard switches to 2.4G
mode and the display shows "2.4G linking".
2.4G pairing: use the toggle switch to select the 2.4G icon,and press and hold the Push Switch until the display shows "2.4G pairing";
then insert receiver,and the display shows "2.4G success" .
(Kind Reminder: The receiver has been paired before delivery, no need to pair 2.4G again; This method is only used when 2.4G
cannot be connected, you can set it for the first time, no need to set it every time)
FUNCTION KEYS, TOGGLE SWITCH, DISPLAY OPERATION
折线位置
Pressing FN+Win locks the WIN key and APP key functions.
Press and hold FN+ spacebar for 3 seconds to restore factory settings.
GIF animation displayed on screen when powering on
Layout switching: Win/Mac
Volume adjustment
Language selection: English/Chinese
Bcklight Effect/Colour Settings
1.Select the effect icon
Use the toggle switch to choose different backlight effects.
2.Select the colour icon
Use the toggle switch to choose different backlight colour.
（This also supports color selection for backlit recording）
Backlight brightness/speed setting
1.Select the Brightness icon
Use the toggle switch to adjust backlight brightness.
2.Select the Speed icon
Use the toggle switch to adjust backlight effect speed.
RGB
Receiver slot USB
and press"OK".
and press"OK".
and press"OK".
and press"OK".
USB/2.4G/BT
有线模式
Type-c
Push Switch: Press and hold for 5
seconds to turn it ON/OFF. Short Press for"OK"
1.Use the toggle to select BT1/BT2/BT3 icon，and connect any group of Bluetooth.
Pairing setting：for example，select BT1，then press and hold "OK"until it shows
which means that the pairing is in progress.
Re-connection setting: for example, select BT1, then click 'OK', and it shows
which means that you have entered the reconnect state.
2. Turn on the bluetooth settings of your device,then search and
3. Once it's done, the display shows "BT1 success!"
Similarly, follow the steps above to store 3 groups of different
(Kind Reminder: please store 3 groups of BT device before switching. )
RESET KEYBOARD WITH SIDE WING
CAPSLOCK
Num
WIN Lock
WIN systems
Mac systems
Wired mode
2.4G
BT
94keys Mechanical switch
Toggle switch
(On Home Screen,toggle up to switch keyboard
connection mode/device easily)
BT1
is paring，
BT1 is linking,
connect"Kzzi Z98"
and back to the Home Screen.
BT devices.
Receiver storage compartment
Sticker on side wing
Remove the right side wing.
Touch the two points of stickers for
restoring factory settings.（wireless mode only)
Sticker on keyboard
Toggle up once
switch mode easily
Toggle down once
GIF animation
Toggle down twice
setting menu