Front Panel Controls - Zenith Concierge H27C35DT Installation & Operating Manual

Front Panel Controls

Use the front control panel to access the menus or just operate the TV
Note: Item 10 Key Defeat, in the installer's menu allows the installer to:
Set Menu Option 10, Key defeat to "0" - Front panel controls give access to menus.
Set Menu Option 10, Key defeat to "1" - Menus not available with front panel controls.
1
Press ON/OFF to turn on your TV.
2 To access the menus press the MENU button on
the control panel. Cycle through the various
menus by pushing the button repeatedly.
3
Press the SELECT button repeatedly to highlight
the option you want to modify.
4 Press either the Right or Left ADJUST button to
modify the option you have chosen.
5
Press CAPTIONS to turn captions on and off.
The menu will disappear after a few seconds.
There are three jacks on the front of the TV that make
connecting Audio/Video devices like camcorders very
simple.
To use the front jacks as the signal source, simply plug
a composite video cable into the VIDEO jack. The TV
will automatically change its source setting to CAM-
PORT, as indicated on the channel selection screen.
The Front Audio/Video jacks are a direct source con-
nection. If you have a device plugged into the front
Video jack, you will not be able to change channels
until you have unplugged the front Video jack.
Front panel control menu operation buttons are not
labeled and are not usually available to the guest.
You can use Ch to select channels and Vol to set the
volume level regardless of the key defeat setting.
206-3489-O
Typical Front Panel Controls
VIDEO AUDIO
CAPTION
LEFT RIGHT
IN
3
4
5
Video
Connects the video signals from any piece of
equipment.
Left/Right Audio Used for stereo sound from
various types of equipment.
OFF
CH
VOL VOL CH
ON
1
2
P A G E 1 3