Clone Selection Menu Choices - Zenith H25F36DT Installation And Operating Manual, Warranty

Clone Selection Menu Choices

Typical Clone on-screen menus
THE CLONE HAS CONTROL OF THE TV
THE CLONE IS VERSION
THE TV IS VERSION
THE SW IS REVISION
CLONE CLOCK=
TV CLOCK=
-PRESS ANY KEY TO CONTINUE.
-DISCONNECT CLONE WHEN DONE.
C. Learn Setup from Master TV
Press 1 to select the "Learn From TV" option, then press ON/OFF,
POWER, or ENTER to go to the Memory Bank Selection Menu.
Pick the Memory "Bank" (1, 2, 3, or 4) you want to store this
Master TV's Setup in by pressing either Channel key repeatedly to
pick Memory 1, 2, 3, or 4. (If you choose a Memory "Bank" that
already has a master TV's setup already in it, it will be overwritten
by this Master TV's setup.) Once the Clone memory bank is select-
ed, press ON/OFF, POWER, or ENTER. The Clone memory bank you
have selected will be shown. Press ON/OFF or POWER to begin
copying the master TV's setup.
Ca. Set the Clock (Optional)
Set the time on the Master TV's Clock. (If the time has already
been copied from another TV into the Clone programmer, you can
set the Master TV's clock by copying the time from the Clone pro-
grammer.) The Clone Programmer can copy the current time to
both a master TV and to the Clone's internal clock; accurate to
within one minute. (Another reason that the Clone programmer
should be equipped with fresh, high-quality alkaline batteries is
for it to keep the time as accurately as possible.)
Since the Clone Programmer's time cannot be set directly, the time
needs to be copied from a Zenith TV equipped with M.P.I. input
capability.
P A G E 4 0
XX
XX
XX
XX:XX
XX:XX
CLONE SELECTION MENU
(1) LEARN FROM TV
(2) TEACH TO TV
(3) SET CLONE CLOCK FROM TV
(4) SET TV CLOCK FROM CLONE
(5) DISPLAY TV SETUP
(6) DISPLAY CLONE SETUP
-TO CHANGE MENU ITEMS, PRESS
CHANNEL KEYS OR DIGITS.
-TO EXECUTE ITEM, PRESS ON/OFF,
POWER, OR ENTER
Once the time is copied to the Clone programmer, the current time
can then be transferred to another TV. (This can be a Master TV, or
another TV which has had the features already set up.)
D. Teach Master TV's Setup to Other TV
Once Learning is complete, remove the M.P.I. cable from the mas-
ter TV and connect it to the TV that you want to copy the master
TV's setup to. With the "TV is Controlled by Clone" message dis-
played, press 2 or use either Channel key to go to the "Teach to
TV" option, press ON/OFF, POWER, or ENTER. Follow on-screen
instructions to transfer the Setup and other information to the
"Learning" TV. After the "Teach to TV is Complete" message is dis-
played, press any key to return to the Clone menus option, then
press ON/OFF, POWER, or ENTER. If finished, remove M.P.I. cable
from the TV.
E. Disconnect TV Power for 5 Seconds
Remove the TV power cord of the newly "Cloned TV" from the
power outlet for about 5 seconds to activate the newly copied
setup.
206-3489-O