Before installing and using the product, please carefully read this User Manual to guarantee correct usage and keep it secure for future reference. Package Contents One earphone casing One set of earphones S/M/L Silicon ear tips in three sizes: S / M / L One charging cable One user manual Before the First Use...
Wearing Method Try different size earphone tips for optimal fit and audio performance. The package includes three earphone tip sizes: small (S), medium (M), and large (L). Attach the chosen tip on each S/M/L earphone as instructed by the picture. Remove the earphones from the charging case.
Page 4
Bluetooth is connecting Bluetooth connected Bluetooth not connected Function operation • Power on: Open the charging compartment cover to automatically power • Power off: Put the charging compartment cover and shut it down. The headset turns off after 3 minutes of no device connection in pairing mode.
Page 5
seconds to reject the call. • Start Siri: Press and hold the touch button on either earphone for 5-3 seconds • Transparency/noise reduction/normal mode switching: press and hold any ear touch button for 5 seconds to switch (can be switched in cycles) •...
Bluetooth Connection Open the casing and take the earphones out. Turn on Bluetooth on your smart device. For smartphones: Enable Bluetooth connection. Search for device name “Soundtec Guide” from the list of available devices. Select the product to pair and establish a connection. For laptops with Windows 10, version 1803 or later: Enable Bluetooth connection.
Page 7
Mono Mode: Opt for either the left or the right earphone for single-ear listening. Touch Command Mono mode 1. Touch sensors on earphones Active Noise Environmental Tap once Control awareness Call Press and hold for 5 Tap two times seconds Tap three times Tap and hold for 5 seconds...
Page 8
2. Touch sensors on the casing Tap the casing sensor Tap once to lock/unlock the casing Slide your finger across the screen to access various Slide your finger features 3. Touch Screen To use the different functions, navigate the touch screen.
Auto Play/Pause Placing the earphone in the ear initiates playing. Removing earphones from the ears pauses the audio. Silence Mode Silence Mode ON: Hold your fingers on earphones touch sensor for 5 seconds to activate ‘ s ilence mode’. In this case no Bluetooth connection is needed and ‘Active noise reduction’...
Page 10
Charging Connecting the casing to a power source initiates the charging of the casing, followed by the charging of the earphones when placed inside the casing. Note: To optimize battery longevity, it is recommended to perform a charging cycle at least once every three months. Note that battery performance will vary based on how the device is utilized and the settings configured.
Specifications Model Porodo Soundtec TWS Earphone AP4 with Touch Screen PD-STGUIDE TWS (True Wireless Stereo) Stereo Type Tracking System Stereo Headphone: Touch control The control mode Casing: Color screen touch control Bluetooth version Bluetooth operating 2.402GHz-2.480GHz frequency ≤ 10 m...
Page 12
Transportation Initially, the manufactured products are packed into boxes for transportation when half-charged (50-90 % battery state).Please note that severe vibration, impact or extrusion should be prevented during transportation. The product must be protected from sun and rain. Precautions Never use abrasive cleaners to clean this product. Do not allow this product to be heated or near fire sources.
Warranty Products that you buy directly from our Porodo website or shop come with a 24-month warranty. When you buy Porodo products from any of our approved sellers, you only get a 12-month warranty. If you want to extend this warranty, go to our website at https://porodo.net/warranty and fill out the form with your information.
Need help?
Do you have a question about the Soundtec TWS Earphone AP4 and is the answer not in the manual?
Questions and answers