Table of Contents
Advertisement
en flexInduction
7 flexInduction
The flexible cooking zone allows you to position cook-
ware of any shape or size any way you like. It consists
of four inductors that work independently of each other.
When the flexible cooking zone is in use, only the area
that is covered by cookware is activated.
7.1 Positioning the cookware
The flexible cooking zone can be configured in two
ways, depending on which cookware is used. In order
to guarantee good thermal detection and heat distribu-
tion, we recommend positioning the cookware in the
centre, as shown in the figures.
As a connected cooking zone
Recommended for cooking with just one item of cook-
ware.
¡ Position the cookware depending on the size:
¡ Recommended oblong cookware
8 Time-setting options
Your hob has various functions for setting the cooking
time:
¡ Switch-off timer
¡ Timer
8.1 Switch-off timer
Allows you to program a cooking time for one or more
cooking zones. Once the time has elapsed, the cook-
ing zone is automatically switched off.
Switching on Switch-off timer
Select the cooking zone and the power level.
1.
Press
.
2.
in the cooking zone lights up.
a
Set the time on the control panel.
3.
If you touch the first half of the settings range,
‒
the cooking time is reduced by one minute. If
you touch the second half of the settings range,
the cooking time is increased by one minute.
10
As two separate cooking zones
Recommended for cooking with two items of cook-
ware.
You can use the front and rear zone independently of
one another, and set a separate power level for each
zone.
7.2 flexInduction connect
By default, the flexible zone is configured as two separ-
ate cooking zones. Switch on the following function to
connect the cooking zones:
1.
2.
a The display lights up. The zone is connected.
Note: If you move or lift the cookware from an active
connected cooking zone, an automatic search starts.
Each item of cookware that is found within the cooking
:
zone during this search is heated at the previously se-
lected power level.
7.3 flexInduction disconnecting
▶
a The cooking zones are separated and work inde-
a The cooking time begins to count down.
a A signal tone sounds once the time has elapsed.
4.
a The displays go out and the signal tone stops.
Note: When you set a cooking time for a cooking zone
in which the fryingSensor is activated, the cooking time
will not start counting down until the selected temperat-
ure level has been reached.
Changing or switching off Switch-off timer
1.
2.
Select one of the two cooking zones.
Press .
Touch .
pendently of each other.
Press
.
Select the cooking zone and then touch
In the settings range, change the cooking time or
set to
to delete the time.
.
Advertisement
Table of Contents
