Advertisement
WARNING & DISCLAIMER
Investigate the layout of your vehicle thoroughly before drilling
or cutting. Take care when you work near the gas tank, gas lines,
hydraulic lines, electrical components and electrical wiring. Do
not use the equipment unmounted. Attach this system securely
to prevent damage, particularly in the event of an accident
or aggressive driving. Do not mount the system so that wire
connections are unprotected or are subjected to pinching or
damage f rom nearby objects. Before connecting or disconnecting
power connections at the system power terminals, disconnect the
+12V DC wire at the battery end. Conf irm that your source unit
and other equipment are turned off while connecting the input
terminals. If you need to replace the power fuse, replace it only with
a fuse identical to the provided fuse. Using a fuse of different type
or rating may result in damage to the system, which is not covered
by the manufacturer's warranty. Do not install any product where
it may be subjected to excessive heat, moisture and dust or where
it may be repeatedly kicked, brushed or bumped. Make absolutely
sure that the terminals for the products are connected to the proper
inputs and outputs f rom the music source. Never run the wiring on
the outside of the vehicle or under it where it can be damaged by
road hazards or any moving parts of the vehicle. Use existing wire
channels, sills, panels and molding strips inside the vehicle to hide
the wiring for safety and a neat appearance.
DISCLAIMER
IMPORTANT: Never cut any metal that is an integral part of the
vehicle's safety or structural support system. If you are unsure, it is
best to have the product professionally installed by an Authorized
ORION Dealer. Never sacrif ice your safety for sound.
9
Advertisement
