Last update: accessory:display:vu_series:vu7a_plus:vu7a_plus https://wiki.odroid.com/accessory/display/vu_series/vu7a_plus/vu7a_plus?rev=1684127460 2023/05/15 14:11 Specifications 7-inch TFT-LCD 1024 x 600 pixels hardware resolution, configurable by software (up to 1920×1080) 5 finger capacitive touch input (USB ID 16B4:0705) Power consumption : 800 mA / 5 Volt Power on/off tact switch 3.5mm audio jack and differential L/R speaker port to support HDMI audio output...
Page 3
2024/03/16 21:39 3/14 ODROID-VU-7-A Plus ODROID Wiki - https://wiki.odroid.com/...
Page 4
Also it's available to connect XU4 / C2 / C1+ using a micro-USB cable and a HDMI cable described in Option 2. Since ODROID C2/C1+ is discontinued, the two kinds of link boards are no more produced. So the below...
Please note that the speaker output turns off when an earjack is plugged in. You can find out the two link boards that link ODROID C2/C1+ and Vu7A in the below example pictures. Since ODROID C2/C1+ is discontinued, the two kinds of link boards are NOT able to purchase.
Page 6
Last update: accessory:display:vu_series:vu7a_plus:vu7a_plus https://wiki.odroid.com/accessory/display/vu_series/vu7a_plus/vu7a_plus?rev=1684127460 2023/05/15 14:11 https://wiki.odroid.com/ Printed on 2024/03/16 21:39...
Page 7
2024/03/16 21:39 7/14 ODROID-VU-7-A Plus ODROID Wiki - https://wiki.odroid.com/...
Page 8
Last update: accessory:display:vu_series:vu7a_plus:vu7a_plus https://wiki.odroid.com/accessory/display/vu_series/vu7a_plus/vu7a_plus?rev=1684127460 2023/05/15 14:11 Software Setting - Ubuntu sudo vim /media/boot/boot.ini ODROID-XU4 Auto Detection With the version 4.14.32-126 or higher version, XU4 automatically detects the resolution of VU7A+ as 1024×600 with HDMI without any change of boot.ini. VU7A+ model provides HDMI functionality, so you don't need modify boot.ini to switch into DVI as you do with VU7+.
Page 9
# - DVI Mode (disables sound over HDMI as per DVI compat) # setenv vout "dvi" ODROID-N2/C4 In case of ODROID-N2, display auto detection logic can detect the hdmi resolution and vout option by default. So you don't need to edit boot.ini but just keep display_autodetect as true.
Page 10
# Uncomment only a single Line. setenv vout "hdmi" ODROID-C1/C1+/C0 To use VU7A+ with ODROID-C1/C1+/C0, you need to configure boot.ini file as following. # Comment default mode 1080p and uncomment 1024x600p60hz # setenv m “1080p” # 1080P@60Hz setenv m “1024x600p60hz” # 1024x600 # HDMI DVI/VGA modes # By default its set to HDMI, if needed change below.
Page 11
2024/03/16 21:39 11/14 ODROID-VU-7-A Plus ODROID-N2/C4 In case of ODROID-N2, display auto detection mode can adjust hdmi resolution and vout mode by default. So you don't need to edit boot.ini. # Display Auto Detection "false" "true" setenv display_autodetect "true" If it doesn't work with display auto detection mode, please try manual mode.
2023/05/15 14:11 ODROID-C2 In case of ODROID-C2, display auto detection mode can adjust hdmi resolution and vout mode by default. So you don't need to edit boot.ini. # Auto Detection of Monitor settings based on your Screen information # See: http://odroid.com/dokuwiki/doku.php?id=en:c2_auto_detect_display...
Page 13
Volume Adjust the volume, 0 ~ 100 (max), default 50 Boot Splash Guide on ODROID-C2 Please refer to this page for boot logo splash on ODROID-C2. workaround for logo splash with VU7+ Regulatory Compliance Documents <html> <ul> <li style=“text-align: left;”>The terms HDMI, HDMI High- Definition Multimedia Interface, HDMI Trade dress and the HDMI Logos...
Page 14
Definition Multimedia Interface(고화질 멀티미디어 인터페이스), HDMI 트 레이드 드레스 및 HDMI 로고라는용어는 HDMI Licensing Administrator, Inc.의 상표 또는 등록 상표입니다. </li> </ul> </html> From: https://wiki.odroid.com/ - ODROID Wiki Permanent link: https://wiki.odroid.com/accessory/display/vu_series/vu7a_plus/vu7a_plus?rev=1684127460 Last update: 2023/05/15 14:11 https://wiki.odroid.com/ Printed on 2024/03/16 21:39...
Need help?
Do you have a question about the ODROID-VU-7-A Plus and is the answer not in the manual?
Questions and answers