Connection in Ducting Version
When installing the ducting version,
connect the hood to the chimney using
either a fl exible or rigid pipe ø 150 or
125 mm, the choice of which is left to
the installer.
To install a ø 150
• To install the dumper 10a.
• Fix the pipe in position using suffi cient
pipe clamps (not supplied).
To install a ø 125
• To install a ø 125 mm air exhaust con-
nection, insert the reducer fl ange 9 on
the dumper 10a.
• To install the Adapting ring 10b.
• Fix the pipe in position using suffi cient
pipe clamps (not supplied).
• Remove any activated charcoal fi l-
ters.
Connection in Recycling Version
• Fix the connection 15 to the frame
using the 4 screws provided.
• Fix the fl ange 10 to the lower opening
of the connection 15.
• Connect the hood air outlet to the
fl ange in the lower part of the junction
using a rigid or fl exible ø 150 tube (by
installer's choice).
electrolux 47
Installation
ø 150
25
10a
ø 125
25
10b
9
10a
15
10
EN