Remove The Touchpad Cable - Lenovo ThinkBook 13s Gen 4 Hardware Maintenance Manual

Figure 11. Remove the I/O bracket
Screw specifications
M2 x L4
Go to
https://support.lenovo.com/partslookup
part:
I/O bracket

Remove the touchpad cable

Make sure the following FRUs (or CRUs) have been removed.
"Remove the lower case" on page 28
"Remove the battery pack" on page 29
Step 1. Peel back the tape. Disconnect the touchpad cable from the system board and the touchpad.
Remove the touchpad cable.
Figure 12. Remove the touchpad cable
Go to
https://support.lenovo.com/partslookup
part:
Touchpad cable
Number of screws
2
to look up the Lenovo part number of the following replacement
to look up the Lenovo part number of the following replacement
.
Chapter 4 Removing a FRU or CRU
33