Health O Meter 498KG Manual page 11

SET UP INSTRUCTIONS (CONTINUED)
Locking Unit of Measure (LB or KG)
The weight measuring unit (pounds / LB or kilograms / KG) can be locked to display weight only in the selected
unit of measure. The unit of measure lock default setting is "unlocked". Follow this procedure to lock the UNIT
button. Note: If Everlock
1. While the scale is turned off, press and hold the ENTER button then press and release the
button. Hold the ENTER button until "AOF=d" or "AOF=E" appears on the display, then release. Use the ▲
or ▼ buttons to advance the display screen until "Unt" appears. Press the ENTER button to change the
setting.
Unt = U Allows the user to toggle weight measurement between LB and KG.
Unt = L Locks the unit button so weight is only displayed in pounds (LB)
Unt = 6 Locks the unit button so weight is only displayed in kilograms (KG)
2. Choose the setting you prefer and press CLEAR to save your selection and exit the options mode.
3. The scale will restart. The display will show "UEr", followed by a version number, and then dashes.
When the display shows "0.0" the scale is ready to use.
Enabling Unit View with Unit of Measure Locked
If the scale is locked per the instructions above, users can still view the alternate weight measuring unit by
enabling the "Unit View" option. Enabling the "Unit View" option allows the user to press the UNIT button to
briefly display the weight in the alternate weight measuring unit. After releasing the UNIT button the display will
return to the locked weight measuring unit. The "Unit View" default setting is "Disable". Follow this procedure to
enable "Unit View" when the weight measuring unit is locked. Note: If Everlock
appear in the Options mode.
1. While the scale is turned off, press and hold the ENTER button then press and release the
button. Hold the ENTER button until "AOF=d" or "AOF=E" appears on the display, then release. Use the ▲
or ▼ buttons to advance the display screen until "UdP" appears. Press the ENTER button to change the
setting.
UdP = d Disables the UNIT button so it will not display the other weight measuring unit.
UdP = E Allows the user to view the other weight measuring unit by holding down the
even if the weight measuring unit is locked. Enabling this function will only allow the user to
view the other unit while pressing the UNIT button; it will not unlock the weight measuring unit.
2. Choose the setting you prefer and press CLEAR to save your selection and exit the Options mode.
3. The scale will restart. The display will show "UEr", followed by a version number, and then dashes. When
the display shows "0.0" the scale is ready to use.
Setting Auto Zero
This option allows the user to select whether the scale will re-set itself to ZERO each time it is powered up or
whether it will use the zero reading from the last time it was zeroed. The auto zero default setting is "enabled"
Follow this procedure to enable or disable this feature.
1. While the scale is turned off, press and hold the ENTER button then press and release the
button. Hold the ENTER button until "AOF=d" or "AOF=E" appears on the display, then release. Use the ▲
or ▼ buttons to advance the display screen until "PU2" appears. Press the ENTER button to change the
setting.
PU2 = d Disabling this feature means the scale does not attempt to find a zero when powered on, rather
it will use the zero setting it had from its most recent use. Health o meter
recommends that if the Disable option is selected, users should manually zero the scale before
each weight measurement by pressing ZERO. Users will see dashes on the screen as the scale
is finding zero.
®
is engaged, this feature will not appear in the Options mode.
10
Back to Home Page
®
is enabled, this feature will not
UNIT button
®
Professional