Table of Contents
Advertisement
en Meat probe
a When the time has elapsed, a signal sounds. A noti-
fication appears on the display confirming that the
operation has finished.
6.
Once the cooking time has elapsed:
If required, you can select other settings and re-
‒
start the operation.
When the food is ready, use
‒
pliance off.
Changing the end time
To achieve good cooking results, only change the set
time before the operation starts and before the cooking
time starts counting down.
1.
Press
on the display.
2.
Press the end time
3.
Use the setting ring to change the end time.
4.
To confirm the change, press
a The change is applied.
Cancelling the end time
You can delete the set end time at any time.
1.
Press
on the display.
2.
Press the end time
3.
Use
to reset the end time.
Note: For operating modes that always require a
cooking time, the appliance resets the time at which
the cooking time ends to the next possible time.
4.
To confirm the change, press
a The change is applied.
10.3 Setting the timer
The timer runs independently during the operation. You
can set the timer for up to 24 hours. The timer has its
own signal so that you can tell whether it is the timer or
a cooking time that has elapsed.
1.
Press .
11 Meat probe
Cook with precision by inserting the meat probe
the food and setting a core temperature on the appli-
ance. The meat probe measures the core temperature
inside the food. Once the set core temperature has
been reached in the food, the appliance automatically
stops heating.
11.1 Suitable types of heating with the meat
probe
Only certain types of heating are suitable for use with
the meat probe.
You can use the meat probe with the following types of
heating:
¡ 4D hot air
¡ Top/bottom heating
¡ Gentle hot air
¡ Gentle top/bottom heating
14
to switch the ap-
.
on the display.
.
on the display.
2.
To set the timer, press the relevant time value on
the display, e.g. minute display "m" or second dis-
play "s".
a The selected value is marked in blue.
3.
Set the timer using the setting ring.
If required, use
4.
To start the timer, press
a The timer counts down.
a The timer remains visible on the display if the appli-
ance is switched off.
a When the appliance is switched on, the display
shows the settings for the current operation. The
timer is displayed in the status display.
a Once the timer has elapsed, a signal sounds. A no-
tification appears on the display confirming that the
timer has finished.
Changing the timer
You can change the timer at any time.
1.
If the timer is running in the background, use
select the timer beforehand.
2.
Press .
3.
Change the timer using the setting ring.
4.
Press
to confirm.
Cancelling the timer
You can cancel the timer at any time.
1.
If the timer is running in the background, use
select the timer beforehand.
2.
Press .
3.
Reset the timer using
4.
Press
to confirm.
into
¡ Circulated air grilling
¡ Pizza setting
¡ Slow cooking
¡ Bottom heat
¡ Keeping warm
11.2 Inserting the meat probe
Use the meat probe supplied or order a suitable meat
probe from our customer service.
WARNING ‒ Risk of electric shock!
Using the wrong meat probe could damage the insula-
tion.
Only use the meat probe for this specific appliance.
▶
to reset the setting value.
on the display.
.
to
to
Advertisement
Table of Contents
