Advertisement
Sunbeam's 3-Way
Safety System
Safety is a major consideration in the
design of a Sunbeam kettle. This is why we
have developed our 3-Way Safety System,
which ensures that your kettle will:
1. Automatically switch off after boiling.
For convenience, safety and energy
efficiency, your Sunbeam kettle will
automatically switch off after boiling.
2. Cut-out for boil-dry protection.
If the kettle is operated without water, it
will automatically cut-out, preventing any
damage to the element.
If this occurs, allow the kettle to cool
before filling with cold water and
re-boiling.
3. Shut-down in case of overheating.
In the event of overheating, the kettle will
automatically shut down to prevent further
damage. Should this occur, take your kettle
to a Sunbeam Service Centre or Appointed
Service Agent.
The Aspire Kettle features the Sunbeam Quiet
Shield which is new and exclusive quiet boil
technology designed to make boiling water a
peaceful practice.
The Sunbeam Quiet Shield
steel disk attached to the kettle floor which
acts as a diffuser plate. It is perforated with
a range of holes which help disperse, and
reduce the size of, the water bubbles thus
significantly reducing the noise of the boiling
process.
Maintaining the Quiet Boil Technology.
Mineral deposits in tap water solidify when
the water is heated; lime scale may be white,
coloured, even rusty-looking and is normally
visible but phosphate scale isn't generally
visible although may cause the water to
appear cloudy when heated.
Regular use of the kettle can lead to the
build-up of these minerals which reduces the
effectiveness of the Sunbeam Quiet Shield
as well as the performance of the kettle.
It is important to descale your kettle regularly
to maintain the Quiet Shield
the life of the kettle.
Sunbeam recommend that the kettle is
descaled every 4-6 weeks. Go to page 6 for
more information on how to descale your
Aspire Kettle.
®
is a stainless
®
®
and to prolong
5
Advertisement
