Connection And Preparation - Sony PS-X700 Operating Instructions Manual

Stereo turntable system
Table of Contents

Advertisement

~—With an RM-65 synchro remote control unit connecied
Disc recording
starts when
the disc playing
begins. When
the
tonearm
lowers
to the record, the tape deck goes
into the the
record mode and, when the tonearm is lifted up, the deck goes into
the auto record muting mode for four seconds, then into the pause
mode.
CONNECTION AND PREPARATION
Connect the ground wire.
PHONO
inputs
Amplifier
to the ground
to the recording outputs
Set the input:selector
to PHONO,
RECORDING
Cassette deck which can be used with your turntable for this
special synchronized operation are those Sony models which
are equipped with a 4-pin remote control jack.
An RM-65 synchro remote control unit (optional) is required
to connect the turntable and the cassette deck.
and unlock the arm rest.
to the synchro remote control jack
Synchro remote control unit RM-65
'Set the SYNCHRO
switch to ON.
to the remote control jack
"Adjust the recording
.
Cassette deck
'cassette deck |
record stand:b
LINE IN
jacks
Desired action
Turntable operation
Synchronized operation of the cassette deck
To record from the beginning of a
record...
Press the START button.
When
the tonearm
lowers onto the record, the
pause mode is released and recording begins.
To lift up the tonearm to move to a dif- | Press the V WZ button.
ferent point on a record...
Or press the <J or — button.
When the tonearm is lifted up, auto record
muting activates for four seconds, then the
To record from a point some way into
the record...
then the V VY button.
Bring the tonearm over the desired point
and press the V VY button.
When the turntable is not rotating,
press the MOTOR ON/OFF button and
pause mode is assumed.
When the tonearm lowers onto the record, the
pause mode is released and recording begins.
To stop recording during record play... | Press the STOP button.
When the tonearm is lifted up, auto record
muting activates for four seconds, then the
pause mode is assumed.
arm rest.
When
record play ends...
[me tonearm returns automatically to the
When the tonearm is lifted up, auto record
muting activates for four seconds, then the
pause mode is assumed.
1

Advertisement

Table of Contents
loading

Table of Contents