Advertisement
Advertisement
Table of Contents
Related Manuals for ACL ENVELOPE X3
Summary of Contents for ACL ENVELOPE X3
- Page 1 ENVELOPE X3 User’s Manual Eurorack Synthesizer Modules...
-
Page 2: Table Of Contents
TABLE OF CONTENTS 1.INTRODUCTION 2.WARRANTY 3.INSTALLATION 4.FUNCTION OF PANEL COMPONENTS 5.CHARACTERISTICS 6.SPECIFICATIONS... -
Page 3: Introduction
1. INTRODUCTION Audiophile Circuits League. -ENVELOPE X3 contains 3 very fast independent ADSR-Envelopes. There are 2 different time ranges that are switchable. Every Envelope has got an inverted output. The Gate-Inputs 2 and 3 are normalized to Gate 1. (For details about normalization, see section 5. CHARACTERISTICS) -
Page 4: Warranty
2. WARRANTY Is it a malfunction? In the event of a fault in use, we will repair or replace it free of charge under the warranty terms stated below. The warranty period is valid for one year from the Please read the user's manual carefully and check again. If you think that there is day of purchase. -
Page 5: Installation
3. INSTALLATION ⚠ WARNING *Always turn the Eurorack unit off and unplug the power cord before pluging GATE the Eurorack power cable. *When attaching the Eurorack power cable, please be careful not to touch the terminal part. +12V Connect to the Eurorack's system power supply (+ 12V) using the supplied Eurorack power cable. -
Page 6: Function Of Panel Components
4. FUNCTION OF PANEL COMPONENTS ① "ATTACK" knob Adjust the attack time. ② "DECAY" knob Adjust the decay time. ③ "SUSTAIN" knob Adjust the sustain time. ④ "RELEASE" knob Adjust the release time. ⑤ "GATE" input jack Inputs a GATE signal. When using only GATE 1, it is possible to control EG 1, 2, 3 using one GATE signal without inserting cables into GATE 2, 3(Normalize). - Page 7 ⑧ "SHORT/LONG" switch It is possible to select the operation speed of the envelope from two ranges.
-
Page 8: Characteristics
5. CHARACTERISTIC GATE input 1 is normalized (internally connected) to GATE 2, 3. "Normalization" Conversely, when inputs of GATE 1, 2 and 3 are individually plugged in, it is means that if you are not using GATE 2 and 3, the input to GATE 1 will be possible to control EG 1, 2, 3 by an independent GATE signal (See FIG. -
Page 9: Specifications
6. SPECIFICATIONS Power Eurorack system power supply Width 21 HP Depth 22 mm Power consumption 36mA on +12V / 23mA on -12V Accessories · Eurorack power cable x1 · Mounting screws x4 ACL-E-AD-1709-1...
Need help?
Do you have a question about the ENVELOPE X3 and is the answer not in the manual?
Questions and answers