Yamaha RX-V750 Owner's Manual page 87

riPPlq_"lifqqlhT"
• Remote control
Refer to
Problem Cause Remedy
page
The remote control Wrong distance or angle. Tile remote control will function within a maximum 8
does not work nor range of 6 m (20 fl) and no more than 30 degrees off\
function properly, axis from tile front panel.
Direct sunlight or lighting (from an Reposition this unit.
inverter type of fluorescent lamp, etc.) is
striking the remote control sensor of this
unit.
Tile batteries are weak.
Tile manufacturer code was not correctly
set.
Replace all batteries.
Set tile manufacturer code correctly.
Try setting another code for tile same manufacturer.
Program the necessary Rmctions independently into
tile programmable buttons using Ihe Learn feature.
3
63
63
66
Even if the manufacturer code is correctly
set, there are some models that do ]lot
respond to tile ren/ote control.
The remote control The batteries of this remote control and/or Replace tile batteries. 3
does not "learn" new tile other remote control are too weak.
functions.
The distance between tile two remote Place tile remote controls at tile proper distance. 66
controls is too much or too little.
The signal coding or modulation of the Learning is ]lot possible.
other remote control is not compatible
with this remote control.
Memory capacity is full. Delete other unnecessary fimctions to make room for 69
tile new functions.
83