Table of Contents
Advertisement
INSTALLATION INSTRUCTIONS
Downflow Installation
1. Detach TC1 and TC2 thermistors, ring temperature sensor, and thermostat from front of coil. The EEV coil, one
thermistor, and the temperature sensor are on the front of the coil, and the second thermistor on the left side.
2. Slide coil assembly and both drain pans out of the air handler. The side water tray should be removed from the unit for
downflow installations.
3. Rotate the coil onto its side to access the bottom opening.
4. Install four foam gaskets, one on each inside corner of the coil assembly.
14
31-5000755 Rev. 0
Advertisement
Table of Contents
