Sony DAV-X1 Operating Instructions Manual page 66

By pressing Number TV's input source
T\-,'VIDEO 0 No input som-ce
(Default)
1 VIDEO1
2 VIDEO2
3 VIDEO3
4 VIDEO4
5 VIDEO5
6 VIDEO6
7 VIDEO7
8 VIDEO8
9* COMPONENT 1
INPUT
CLEAR* COMPONENT 2
INPUT
ALBL'M * COMPONENT 3
INPUT
ALBLUVl +* COMPONENT 4
INPUT
* Except for No:th American and European models
Operating for the THEATRE
SYNC function
Point the remote to the direction of TV and this
system, then press THEATRE SYNC once.
While transmitting the code from the remote, the
TV button flashes.
If this function does not work, change the
transmit time. The transmit time varies
depending on the TV.
To change the transmit time
Press and hold TV CH + while entering the
code for transmit time (see the table) using the
number buttons.
The transmit time from the remote is selected.
If you successfully set the transmit time code,
the TV button flashes twice slowly. If the setting
is unsuccessful, the TV button flashes 5 times
quickly.
By pressing Number Transmit time
TV CH + 1 05 (Default)
2 1
3 15
4 2
5 25
6 3
7 35
8 4
• This fimction is only tbr SONY TVs. (This fimction
may not work on some SONW TVs)
• If distance between TV and this system is too far, this
flmction may not wo:k Install the system ::ear the
TV.
• Keep the ten:ore pointed in the direction of the TV
and this system while the TV button is flashing.
66us