Panasonic Omnivision PV-9455S Operating Instructions Manual page 14

lulti-Brand Control Feature
The Remote Control may be set up to control some TV or Cable Box functions.
Multi-Brand Control Setup
Find your TV and Cable Box Brand Code
Number on following page.
3 POWER
2 TV or CABLE
Hold down TV and enter code
Hold down CABLE and enter
code with NUMBERED keys.
* For code 100 or greater, press the
100 key first, then remaining digit.
E.9. for 102, press 100, then press 2.
2 NUMBERED
keys
Confirm code entry.
Press POWER to turn
selected unit ON or OFF.
* See table below for list of
controllable functions in each mode.
Cc * Please repeat Multi-Brand Control setup after replacing remote
control batteries.
* The remote contro! will not operate all TVs, and Cable Boxes
made by manufacturers listed. If you get no results, your
particular brand cannot be controlled.
Using the Multi-Brand Control
After remote control is setup, you can select VCR, TV, or CABLE for the desired function.
Press VCR or TV or CABLE on the remote control.
This table shows which buttons are available for each mode.
Available
VCR All Functions VOL UP/DOWN dl
VCR/TV, PLAY, STOP, POWER, INPUT,
SAP/ Hi-Fi, FF, REW, NUMBERED keys,
ZERO/ 1MIN, COUNTER
VOL UP/ DOWN
RESET
єт In TV or CABLE mode, it may be necessary to press ENTER after pressing NUMBERED keys for channel selection.
VCR/TV, PLAY, STOP ,
SAP/ Hi-Fi, FF, REW,
PAUSE, SLOW,
REC/TIME, SPEED,
ZERO/ 1MIN, COUNTER
RESET
POWER, ENTER,
NUMBERED keys
(except 100key),
CH UP/ DOWN