Panasonic SA-HE9 Operating Instructions Manual page 22

The radio
P mem - MTM
You can tune radio stations manually by selecting the station's
irequency, or you can preset up to 30 stations into channels to
make tuning simpler (= page 23).
1 Turn [INPUT SELECTOR] to select
"TUNER".
2 Press [BAND] to select "FM" or "AM".
3 Press [TUNING V or A] to select the
frequency of the station.
Tuning intervals: FM - 0.2 MHz
AM — 10 kHz
"TUNED" lights when tuned.
"STEREO" lights during FM stereo broadcasts.
Automatic tuning
Hold down [TUNING V or AJ until the frequency begins to scroll.
Tuning stops when a station is found. (Tuning may stop if there is
interference.)
i 2 | | . Improving reception
o DSP DEFEAT
3 TUNING | You can improve reception by turning off the DSP (= page 16).
Press and hold [DSP SOUND MODE} until "DEFEAT" appears.
Press and hold [DSP SOUND MODE} again to turn the DSP on.
o For your reference
DVD players can interfere with radio reception. Turn the DVD
player off or move it further away from the antennas if this
occurs.
@ Press [TUNER/BAND].
The band changes each time you press the button.
@Press [DIRECT TUNING/DISC ENTER].
@Press the numbered buttons to enter the
ee ee e i
frequency.
e.g. To select 107.9 MHz, press [1] — [0] — [7] — [9]
Tuning intervals: FM - 0.1 MHz
AM - 10 kHz
[Gf]
1.If you do not press a button while the cursor is flashing, the
. display returns to the frequency being received.
2. If the frequency has not been input correctly, "ERROR" will be
displayed.
JE AE
RQT$918