App Troubleshooting - Intex FastFill AP620DA Owner's Manual

PROBLEM
Bluetooth connection
failed
App does not work
or respond
App failed to access
the device's location
to finish the pairing
©2023 Intex Marketing Ltd. - Intex Development Co. Ltd. - Intex Recreation Corp. All rights reserved/Tous droits réservés/Todos los derechos
reservados/Alle Rechte vorbehalten. Printed in China/Imprimé en Chine/Impreso en China/Gedruckt in China.
®™ Trademarks used in some countries of the world under license from/®™ Marques utilisées dans certains pays sous licence de/Marcas registradas
utilizadas en algunos países del mundo bajo licencia de/Warenzeichen verwendet in einigen Ländern der Welt in Lizenz von/Intex Marketing Ltd. to/à/
a/an Intex Development Co. Ltd., Hong Kong & Intex Recreation Corp., P.O. Box 1440, Long Beach, CA 90801 • Distributed in the European Union
by/Distribué dans l'Union Européenne par/Distribuido en la unión Europea por/Vertrieb in der Europäischen Union durch/Intex Trading B.V., Ettenseweg
46, 4706 PB Roosendaal – The Netherlands • Distributed in the UK by Unitex Service (UK) Limited, 21 Holborn Viaduct, London EC1A 2DY, UK.
www.intexcorp.com
SAVE THESE INSTRUCTIONS

APP TROUBLESHOOTING

CAUSE
• Mobile device • Activate the Bluetooth function on the mobile
Bluetooth not
activated. • Make sure the mobile device is within 5 m
• Out of range.
• The pump is not • Make sure the pump is powered on.
powered on. • Make sure that the pump Bluetooth connection
• The connected
Bluetooth is not
the current pump • Close the App, re-launch the App and try to
Bluetooth.
• The App does • Force-quit the App, re-launch the App and try
not load.
• Uninstall the App and reinstall it again.
• Incompatible • Ensure the right version of operating system
mobile devices
operating system a.For all the Apple devices regardless of the
(Android devices
only).
b.For the Android devices, only 6.0 and greater is
Page 6
(20IO) AP620DA ELECTRIC PUMP ENGLISH 4.875" X 7.25" 04/18/2023
SOLUTION
device.
(16 ft) of the product to be connected.
correspond to the pump on the air bed to be
connected with.
connect the air bed with your mobile device
again.
to connect the air bed with your mobile device
again.
(Android devices only):
version of operating system, NO need to turn
on the device's location to finish the pairing.
required for app to access the device's location
to finish the pairing.
20
IO