Attention Before Operation; Caution In Using - Reliable 3500SD Instruction Manual And Parts Book

1. Attention before operation

1. Before you put the machine into operation for the first time after the set-up, clean it thoroughly.
2. Though every machine is strictly inspected and tested before leaving Reliable, the machine parts
may be loose or after long distance transportation due to jolt. A thorough examination must
be performed after cleaning the machine. Turn the balance wheel to see if there loose, uneven
resistance or abnormal noise. If these exist, adjustment must be made accordingly before the
machine is operated.
3. Never operate the machine without lubricating the oil pan.
4. Confirm the power plug has been properly connected to the power supply.
5. The rotation of the sewing machine is counterclockwise as observed from the
hand-wheel side.
2. Caution
1. To avoid personal injury, never put your hand under the needle when you turn "ON" the power
switch or operate the machine.
2. To avoid personal injury, never put your fingers into the thread take-up cover while the machine is
in operation.
3. To avoid possible accidents because of abrupt start of machine, turn OFF the power of the
machine before tilting the sewing machine head.
4. Always turn OFF the power when leaving the machine.
5. To avoid personal injury, never operate the machine with any of the safety devices removed.
6. Never clean the surface of the machine head with paint thinner or similar chemical.