Error Mode; Heat Indicator - Pioneer SUPER TUNER III KEH-M8550 Owner's Manual

Error Mode
Should an abnormality occur — for example, Multi
Piay CD Player cannot be operated, or the music
stops during CD playback —- the main unit will
Indicate an error mode
While it the un in error mode, a number will be
displayed indicating the cause of the error, so please
check the items listed below. If you cannot fix the
problem after checking the cause of the error, please
Contact your dealer or your nearest Pioneer service
center,
Note:
When using the Multi-Play CD Player, COX-M100,
CDX-M70, CDX-M50 and CDX-M40, an error will be
displayed only in the form of " , without the
number which indicated the cause of the error. When
this display appears, please check items 11, 12, 14, or
30 listed below.
HEAT indicator
To prevent deterioration in the semi-conductor laser
from overheating, playback of a CD will stop when
the temperature surrounding the Muiti-Play CD Piayer
rise during play.
When this occurs, "HEAT" will be indicated on the
display. Please wait until the temperature drops.
+ This function refers to the Muiti-Play CD Player
CDX-M100, It does not refer to other Multi-Play CD
Players.
Cause
Treatment
| Dirt or ora scratch on the disc stops the
11,12 | laser beam from being able to focus.
| Wipe the dirt off the disc,
Exchange the disc i
|The disc has been inserted upside down.
An unrecorded one-time-recordable
{
i
The disc has been inserted upside down,
| compact disc (CD-R) is being used.
| Dirt or a scratch on the disc hinders the
Wipe the dirt off the disc.
| ,
play CD player.