Connections - Yamaha UW10 Owner's Manual

Connections

Combining the UW10 with other devices allows for versatile applications as
follows:
High-quality music production system using digital connections
Using the UW10 along with a tone generator, such as MOTIF-RACK, enables high-
quality recording.
Connect the UW10, the MOTIF-RACK and a computer using USB cables. Connect
the MOTIF-RACK to the UW10's DIGITAL IN jack, and set the UW10's SOURCE
SELECT switch to "DIGITAL."
Since the signal is sent from the UW10 or MOTIF-RACK to a mixer via an analog
connection, you will be monitoring an analog signal through powered speakers or
headphones. On the other hand, the signal is recorded via a digital connection
from the UW10's DIGITAL OUT jack to a connected MD recorder. This
configuration enables you to make high-quality digital recordings.
PC + Sequence Software
Set the SOURCE
SELECT switch
to "DIGITAL."
NOTE
11
USB (MIDI data)
USB
(audio data)
DIGITAL IN
IN OUT L
DIGITAL INPUT
SOURCE SELECT
DIGITAL
INPUT
TRACK DOWN
UW10
MD Recorder,etc
When you are using the connections illustrated above, set the Echo Back setting of
your sequence software to "Off."
Refer to the Owner's Manual for the sequence software for detailed information on
setting the Echo Back parameter.
R L R
OUTPUT
OUTPUT
USB-AUDIO INTERFACE
DIGITAL OUT
MOTIF-RACK etc.
DIGITAL
DIGITAL
OUT
OUT
INPUT
OUTPUT
Mixer, etc
powered speakers
UW10 Owner's Manua
l
13