Siemens SIERS 2.0 Instruction Manual page 27

Connections
Connections of the motor used in the Local HMI
Smart setup are included the Figure 30 below.
CN2
Ethernet in
PWR (CN1)
Power input
Figure 30: Interface and Connections for Smart Motor
Indicators
The smart motor is equipped with indicators used
for troubleshooting and testing. See Figure 31 for
details.
Indicator overview
Unused but user configurable
Power indicator
Error indicator
Figure 31: Indicator Layout on the Smart Motor
SIERS 2.0 Siemens Integrated Electrical Racking System Instruction Manual
CN3
Ethernet in
CN4
RS485 + I/O
+ Backup (opt.)
Motor in position
(can also be user configured)
Motor moving
(can also be user configured)
27