Making The Connections - Philips VG8020 Installation Manual

CHAPTER 1
MAKING THE CONNECTIONS
Most of the connection sockets are to be found in the rear of your computer:
5a6a 5
1
CD
Mains connector
Take the power cable, connect it to the computer and insert the plug into a mains outlet.
®
YOUR COMPUTER SHOULD BE TURNED OFF BEFORE YOU MAKE ANY
FURTHER
CONNECTIONS!
Check the power-on indicator. If it lights up, press the power switch
®
before you
continue.
®
1V connector
3
Take the special lV cable, connect one end to the computer and the other to the aerial inlet
of your lV set.
@
Monitor connector
When you have the good fortune to have a special monitor, the monitor cable should be
plugged in here.
@
Connector for data recorder
Your data recorder cable should be plugged in here.
®
Printer connector
2
If you have an MSX printer, the plug of the connector cable will fit here very neatly. Do not
forget to secure the plug with the locking-clips@.