FIPA TR01.250-2000-2-1000 Quick Start Manual

FIPA Spider and chain hoists | At a glance

FIPA Spider for load up to 500 kg

Vacuum lifters are superior to classic lifting devices with slings due to their faster and easier handling. Place the vacuum cup, press
the manual slide valve and wait two to three seconds until the vacuum is generated. It is this easy to work with the vacuum lifter
FIPA Spider!
The vacuum lifter FIPA Spider is a vacuum traverse that was developed with „plug & play" for use on a chain hoist.
Vacuum traverses, also called vacuum lifters in general, are used for handling plates, panes and sheets. Vacuum lifters are
especially used in the wood, sheet metal and glass processing industries. They make the loading of processing machines and the
storage of various goods much easier.
The FIPA Spider is available as standard for loads up to 250 and 500 kg. We can adapt the cross beam to meet your needs with a
variety of accessories.
> Fitting for the crane bulb for fastening the chain control on the operating handle
> Signal Lamp for optical warning in loud working environments
> Hinge for a flexible control panel ensures an upright position, even at a low working height
> Additional cross beams ensure a large suction area and improve the support of deformed materials
> variable selection of vacuum cups, depending on the application
The modular construction makes it possible to develop special versions quickly and easily � we will be happy to consult you!
FIPA also offers chain hoists and cranes that are compatible with our vacuum traverses. The competent FIPA team takes care of the
complete system, from planning through to turnkey installation.