The torque is applied between the fastener and the reaction surface. The best result is achieved in combination with the HYTORC LoadDISC or the HYTORC NUT. This manual provides information for the jGUN Single Speed, jGUN Dual Speed Plus, jGUN NutRunner and WheelGUN.
4. Fully engage the torque wrench socket on the nut. 5. Pull the trigger until you notice the fastener is loose. Fig. 19: jGUN Single Speed into action FOR MORE INFORMATION HYTORC Nederland BV h.o.d.n. TorcGUN | Platinawerf 8 - 6641 TL Beuningen - NEDERLAND | Tel: +31(0)24 - 3 660 660 | www.hytorc.nl HYTORC Benelux BVBA h.o.d.n.