Yamaha SPS-80 Setup Instructions

Read this before setup
● This speaker stand is only for the speaker systems listed
in "USABLE SPEAKERS" below. Do not use the
speakers other than these listed.
● To prevent the speaker from falling, use the screws and
parts provided with the stand.
● To prevent the speaker stand from falling over, select a
location which is flat and stable.
● To avoid accidents resulting from tripping over loose
speaker cables and to prevent the speaker stand from
falling over, fix the speaker cables to the wall, etc.
● Do not let the children lean on the stand as this might
cause the serious accidents resulting from the falling
over of the speaker stand.
DIMENSIONS
Top view
Side view
M4 (3/16")
(When shortened to minimum) (When extended to maximum)
SPEAKER STAND
SPS-80
Thank you for selecting this YAMAHA SPS-80 speaker stand.
PRECAUTIONS
(mm/inch)
● To prevent the speaker stand from discoloring and
warping, keep the speaker stand away from the stoves
and places where it will be exposed to direct sunlight,
etc.
● Do not attempt to clean the speaker stand with chemical
solvents as this might damage the finish. Use a clean,
dry cloth.
● Secure placement or installation is the owner's
responsibility.
YAMAHA shall not be liable for any accident caused
by improper placement or installation of speakers.

SPECIFICATIONS

Dimensions (W x H x D): 300 x 650 – 900 x 300mm
(11-13/16" x 25-9/16"
– 35-7/16" x 11-13/16")
Weight: 2.1 kg (4 lbs. 10 oz.)
USABLE SPEAKERS
YAMAHA
● NX-230P
(the main and rear speakers included in the NS-P230/
NS-P236 speaker package)
● NX-220P
(the main and rear speakers included in the NS-P220
speaker package)
● NX-S80S
(the front and rear speakers included in the AVX-S80
sound system)
● NX-S60S
(the front and rear speakers included in the DVX-S60
sound system)
● NX-S77E
(the rear speakers included in the AV-S77 sound
system)
● NX-VS10E
(the rear speakers included in the VS-10 sound system)
* Use a speaker of 1 kg or less.
* Use a speaker with a screw hole of 4 mm in diameter
for attaching the speaker mounting bracket.
SETUP
INSTRUCTIONS
1
E-